Stock Code:430676

Home > Products > Slitter Machine >

Slitting line

Slitting line

Slitting line
CategoriesSlitter Machine
AlbumView larger image
BrandHengli, SUMIKURA
Model0.5-2mm thick
Update Time2018-11-17
Detail Information

I. Technical Data

Model No.
Coil thick
(mm)
Coil width
(mm)
No. of slits
Tolerance
(mm)
Speed (m/min)
Coil weight
KJS-2X550
0.5-2mm
100-500
30-6
+/-0.05
60
5tons
KJS-2X850
0.5-2mm
100-800
30-6
+/-0.05
60
5tons
KJS-2X1300
0.5-2mm
500-1250
30-12
+/-0.05
50-120
10tons
KJS-2X1600
0.5-2mm
500-1600
30-12
+/-0.05
50-120
15tons
KJS-2X2000
0.5-2mm
500-2000
30-12
+/-0.05
50-120
15tons

 
II. Introduction of the slitting line
Slitting line machine not only for the steel service cutting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils.  
Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, recoiler and coil car, hydraulic system, Etc. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.
This line can be adjusted to do recoiling or dividing work to meet customer’s demand.
 
III. Machine parts in the working line
1.        coil car 
2.        decoiler                                                                   
3.        coil guide and pinch roll                    
4.        Slitting machine
5.        scrap winder (both sides)
6.        Loop table
7.        separator and tension table
8.        Deflector roll and exit threading table
9.        Recoiler
10.    Over arm separator in the recoiler.
11.    Exit coil car for recoiler
12.    Hydraulic system
13.    pneumatic system
14.    electrical control system