Stock Code:430676

Home > News > product news >

Of silicon steel cut to length line of the main purposes

Of silicon steel cut to length line of the main purposes
Issue Time:2012-05-17

Found carbon steel, pinhole detector utilizing hydraulic or mechanical shears. Cut creating a sharp blade to mow you desire the low-carbon steel. One important factor includes a direct effect on the quantity low-carbon steel cutting has put together from your low-carbon steel blade, shears distance settings. In the event that distance is set to wide, metal bending, other than cut. Should the distance is positioned to off, shear blade will bind additionally the blade can break.

1 A measurement of an thickness in the sheet metal of low carbon steel. A sheet of metal is round, a number of slots around its edges. Effortless slip on the advantage of a low carbon steel plate through the slots numerous thickness and slot, please do not wobble all around, you find with the back-end of the slot tag specification size.

2 Cut, read the manual one is using a cutting low carbon steel to view techniques to set the gap in regards to the shear blades and shears. silicon steel cut to length line is based on over the gap out of your sheet metal on metal thickness. As an illustration, the 11 plate is 8 inches thick, which means really should try to set the blade clearance .125 (1/8 in.).

3 Open the sheet metal shear and carbon steel plate attached to the shears.

4 set following on from the block of sheet metal cut at the size it's best to cut the low-carbon steel.

5 slide shear carbon steel, until you think the metal to perform a back account. Firmly press every corner associated with the mild steel plate to be certain it's to face about rest marriage block.

6 Press the pedal sheet metal cutting length cutting low-carbon steel.

7 Silicon steel shearing line do this again til you have a low-carbon steel cut in to the appropriate measurements.