Stock Code:430676

Home > Products > Shearing Line > Cut to Length Line2 >

Cut to length line for stainless steel

Cut to length line for stainless steel

Cut to length line for stainless steel
CategoriesCut to Length Line2
AlbumView larger image
BrandHengli, SUMIKURA
Update Time2018-11-16
Detail Information
I.Technical Data for KJD series
Material cutting
stainless steel
Item
Unit
Range
Thickness
MM
0.5-4,1-6, 2-8, 3-12.
Width
MM
1250,1500,2000
Load weight
T
15
Leveling precision
MM/M2
1
Measuring precision
MM/M
0.5
Line speed
M/MIN
30, 20
Power
KW
95
 
II. General Induction of cut to length line
Cut To Length Lines can do uncoiling, leveling, measuring, cross-cutting to length and stacking work. It mainly includes uncoiler, leveler, measuring encoder, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.
Cut to length line is controlled by NC servo system. It has PLC controlled the length measurement. The information of length, shearing numbers and speed can be input to the PLC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a encoder with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.
  
III. LIST OF EQUIPMENTS UNDER SCOPE OF SUPPLY:
1.      Coil car
2.      Decoiler
3.      peeler table
4.      precision leveler  
5.      Loop Bridge
6.      Side Guide Roller
7.      Servo feeder
8.      Shearing Machine
9.      Conveyor table
10. stacking table
11. lifting table    
12. Hydraulic Systems
13. Pneumatic Systems
14. Electrical System PLC Control