Stock Code:430676

0.2-1.0mm Slitting Line

0.2-1.0mm Slitting Line
CategoriesAutomobile inner/outer board blanking device
BrandHengli, SUMIKURA
ModelHL-ZJ1250-120
Update TimeMar 19,2024
Detail Information

The equipment is used for slit the silicon steel, tinplate, steel, aluminum and etc. It used Siemens PLC, Yuken hydraulic components and NSK bearings in the key position.

 

Name & Model

HL-ZJ1250-120 slitting line

Use

For accurately slitting silicon-steel, tinplate, strip steel and aluminum strip.

Characteristics

German Siemens PLC control, Japanese YUKEN brand hydraulic components.

Technical parameters

1)Slitting thickness: 0.2-0.5mm

2)Max slitting width: 1250mm

3)Max uncoiling weight: 10T

4)Uncoiling O.D.: ≤1600mm

5)Uncoiling I.D.: 480-520mm

6)Slitter mandrel diameter: 180mm

7)Slitting quantity: 30 strips (thickness 0.50mm)

8)Slitting width: ≥30mm

9)Recoiling weight: ≤10T

10)Recoiling I.D: 508mm

11)Slitting parallel tolerance: 0.05mm/m

12)Burr: ≤3% of the strip thickness, but not less than 0.02mm.

13)Slitting width tolerance:0.05mm

14)Speed regulation method:DC

15)Speed:10-120m/min

16)Total consumption:150Kw

17)Land occupation:20×8m

18)Other performance:All hydraulic driven, Proper circle recoiling, Pneumatic-expansion type strip tightener, Strip end crop, Side collector.

19)Unique design:Touch screen operation, Siemens PLC control, Whole ling automatic running, On-line adjust slitting width, Adjust knife without removing shaft, On-line grinding.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Review
  • Loading...
Do you need any help?
We can help you find what you want! Talk to our sales team members and benefit from their expert advice
*Email
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.